English
Thermocouple Manaul Feeding Hot Bar Soldering Machine
Hot Bar Soldering Machine Principle:
A 2000W transformer is used to generate a large current with low voltage, which is heated rapidly through the welding joint. Pulse current refers to the on and off frequency ratio of current. The larger the pulse ratio is, the larger the current output is, and the faster the welding joint temperature rises, it is how a hot bar soldering machine works.
Hot Bar Soldering Machine Features:
• The heating rate is customized to meet different products.
• Molybdenum alloy head to ensure temperature stability, fast heating speed and long service life.
• The level of soldering head is adjustable, to ensure uniformpart assembly processing.
• Digital display to control temperature, easy and clear.
• With digital pressure meter, can be preset pressure range.
• Special welding materials.
• It is equipped with precise PID control, phase Angle instead of pulse drive.
• Little vibration, low noise, no voltage fluctuation.
• Molybdenum alloy soldering head instead of traditional titanium alloy, warmmingfaster, good coefficient of heat transfer, wear-resisting.
Hot Bar Soldering Machine Configuration:
Under pressure cylinder : SMC
Pressure display table : Analog
Magnetic cylinder sensor switch : SMC
Solenoid valve : made in Taiwan
Connectors and trachea : made in Taiwan
Filter regulator : made in Taiwan
Precision cylinder under pressure regulator : SMC
Control system: independent research and development ( Chinese )
Power transformer : 220V, 2000W
Driver module : 45A
Vacuum Generators : SMC
Button switch: Schneider
Relay: Omron
Chassis components: aluminum plus bending parts
Hot Bar Soldering Machine Specification:
| Machine size | 610×410×450mm |
| Working area | Max 150*150mm |
| Machine weight | 62Kg |
| Working air pressure | 0.6-0.8Mpa |
| Fixture quantity | 2 |
| Thermode head size | Max 40*3mm |
| Welding precision | pitch 0.2mm |
| Pressing time | 1~99.9s |
| Temperature settings | RT~500℃ tolerance ±5℃ |
| Welding pressure | 1~20Kg |
| Temperature settings | Two |
| Working environment | 10-60℃,40%-95% |
| Power supply | AC220V±10% 50HZ,2200W |
| Alignment mode | CCD + LCD Monitor |
| Feeding mode | Manual |
| Starting mode | Press start buttom |
| Rotation Platform | Cylinder control,tolerance< 0.02mm |
Hot Bar Soldering Machine Parameters:
| Temperature range | 50℃ to 500℃ |
| Temperature accuracy | ±1°C |
| Bond timer | 0-12 seconds |
| Bond air pressure | 0.4-0.6MPa |
| Pressure accuracy | ±0.05MPa |
| Max bond force | 1100N |
Customized Thermode and Fixtures:
Thermode Head Introduction:
Molybdenum alloy head to ensure temperature stability, fast heating speed and long service life.
The level of soldering head is adjustable , to ensure uniformpart assembly processing
Digital display to control temperature,easyand clear
With digital pressure meter, can be preset pressure range
Special welding materials
It is equipped with precise PID control, phase Angle instead of pulse drive.
Little vibration, low noise, no voltage fluctuation
Molybdenum alloy soldering head instead of traditional titanium alloy, warmmingfaster, good coefficient of heat transfer, wear-resisting
Hot Bar Soldering Machine Application:
During hot bar soldering, a thermode is heated to a specific temperature by a pulse heat power supply. The thermode applies sufficient heat to cause the solder to melt and flow, after which the components are cooled under pressure, thereby creating an electro-mechanical bond between the two components. It is available for FFC to PCB soldering, FPC to PCB soldering, wires to PCB soldering, copper to copper soldering, ect.
Our Certificate:
Company Profile:
2008, Dongguan factory established, and start producing standard v-cut PCB separators and hot bar soldering machines.
2010, Our products are widely sold in local market.
2012, Start producing customized v-cut depaneling and PCB router.
2014, Expand our sales team for providing better service to more customers.
2015, Start manufacturing laser depaneling machines.
2017, Start manufacturing soldering robot and screwdriver machines.
2018, HK company established.
2019, Huizhou factory established, due to expansion.
2020, Business expansion again, products covering PCB depaneling, PCB soldering, screwdriver system, etc.
2021, Our machines cover all Chinese market and also popular in America, Europe, South Asia, East Asia, etc.
IPv6 network supported 