Precautions for Operation of LED PCB Cutting Machine

What problems should we pay attention to in the daily application of LED PCB cutting machine?

1. Before starting the LED PCB separator, first determine the power supply voltage AC220V. Turn on the position of the equipment power switch. There are five stroke settings: 0, 100, 200, 300 and 400. Select the appropriate stroke according to the PCB board. Adjust the upper and lower height of the cutter according to the thickness of the PCB boards. Select the working speed of the equipment according to the speed selection key: ultra fast, fast, medium speed and slow speed. Adjust the height of the channel to ensure that the PCBA board is placed horizontally. During depaneling, the marginal groove of PCBA shall be stuck in the direction of the lower cutter of the LED strip PCB cutting machine. Hold the PCBA firmly with both hands and gently step on the pedal with your feet until the cutter reaches the set distance and stops actively.

2. During the depaneling processing.

1. It should be noted that the LED PCB depanelizer machine is only used for depaneling, and the operator should wear anti-static gloves according to the relevant regulations of the company.

2. During operation, pay attention to hand ornaments, hair and loose clothes, and avoid approaching the upper and lower blades to avoid safety problems.

3. When cutting the board, you must select two directions before stepping on the pedal switch, otherwise the cutter wheel will not work In case of abnormality, quickly press the emergency switch and release the pedal switch to avoid accidents. This safety instruction is applicable to SMT workshop. In order to safely and reasonably use the LED PCB cutting machine. Organize designated personnel to carry out operation and maintenance.

The above is a brief description of the operation of the LED PCB depaneling machine. For details, please operate under the guidance of professional masters.