How to maintain large table PCB router machine

At present, customers hope that our large table PCB router machine can have high efficiency, which often affects its efficiency in the following two aspects: first, the personnel who operate the machine should maintain and use the equipment carefully when the automatic PCB router machine personnel operate it. 2. Equipment maintenance and repair personnel. Of course, our operators and maintenance personnel should cooperate with each other to master daily maintenance and repair. When there is a problem with the PCB router machine, professional personnel should be found in time for maintenance and operation. It should be noted that it should not be used in places with high or low temperature.

The following is the maintenance method of semi-auto PCB router machine:
1. It is necessary to check whether there are materials falling from the electric cabinet. If so, it needs to be cleaned in time and maintained daily. About the maintenance method of the front and rear panels of the host: the front and rear panels of the host need to be wiped every day.
2. XYZ motor wiring and maintenance method of origin limit sensor: generally, the sensor shall be wiped with external dust and oil stain once a day.
3. About the maintenance method of the iron plate at the bottom of the main engine: if the parts fall, they need to be removed and replaced in time.
4. About the maintenance method of the three-point combination: check whether there is water in the water filter cup every day. If there is water, press the Yellow drain to remove it.
5. Maintenance method of spindle: wipe and clean the spindle when the machine stops working every day.
6. Maintenance method of vacuum cleaner: wipe and clean the vacuum cleaner after the machine stops working every day.